The incessant dripping sound of a kitchen faucet is enough to drive anyone nuts. The dreaded leaky faucet is one of the most common plumbing problems homeowners have to deal with, and while generally it is simple to fix it, we often put off this task and put in ear plugs instead. It is important to repair a leaky faucet to not only maintain your peace of mind, but also to protect your home from costly repairs, and in the process save money on your water bill. The range of possible causes of a leak is long, and the degree of difficulty of fixing the leak varies depending on which type of faucet you have.
Should you find yourself with such a problem, Call Recovey Loss Consultants for your free damage assessment.
Tuesday, March 16, 2010
Sunday, March 7, 2010
Mold and mildew are naturally occurring and are everywhere in our environment. When the amount of mold in our homes exceeds what is normal, we tend to take notice. Regardless of its health effects, none of us want excessive mold in our homes. Mold needs moisture to grow, and if you’ve discovered a mold problem, the first step is to find the moisture source. Routine homeowner maintenance is crucial to avoiding the buildup of moisture in your home. Proper ventilation and insulation are key components of preventing moisture buildup and mold growth.
What can you do?
What do you do if you suspect that you have a mold problem? Here are some important things for you to know and steps you can take to find out more.
Mold growth requires a wet environment, and it usually grows in the home as a consequence of improperly controlled water damage.
Many molds may require a high level of moisture during initial growth, but when mature, survive and reproduce indefinitely at much lower moisture levels, sometimes as low as standard indoor humidity levels.
Mold growth can be effectively prevented only by quick and efficient drying, which removes the moisture necessary for initial mold growth before it can get a foothold.
If you suspect mold, contact an experienced contractor certified in mold remediation.
The best way to thwart mold is through prevention. Here are some tips to consider:
Locate and correct the source of the moisture.
Inspect your roof annually for leaks. Replace missing shingles or tiles. Check flashing installed between surfaces, including chimneys, vent stacks or dormers; they are often the most common sites for leaks.
In colder climates, make sure you have plenty of attic insulation and ventilation. This can prevent the formation of ice dams which can cause water to back up under roof shingles.
In any climate, attic ventilation is a must. This allows for warmer air to escape and better circulation.
Inspect plumbed rooms, such as the kitchen, laundry room, and bath for leaks or signs of leakage in water supply and waste lines.
Make sure that shower walls and floor are structurally sound, and grout and joints are well sealed and in good condition.
Inspect commode water supply lines for leakage. Check to make sure the fixture is properly secured to the floor and does not shift or rock when weight is applied.
Inspect central air-conditioning systems annually for proper operation and drainage, and to ensure there is no microbial growth in the air-handler, pan, or duct work.
Inspect crawl spaces to ensure adequate insulation, ventilation, and drainage.
You want your home back to the condition it was in prior to the mold damage. At Recovery Loss Consultants of Broward County, FL, we know just how to do that.
How can you help?
You’ve discovered mold in your home, and you’re on the right track to finding out what your next step should be. Here are some things you should know to face your mold claim with confidence.
Moisture control is the key to mold control.
Locate the source of moisture. It may be due to improper or inadequate ventilation.
If the source is running water, turn off the water to the structure.
Keep gutters clear so water doesn’t collect.
Make sure the ground slopes away from the structure so water won’t pool or seep into the foundation.
Keep indoor humidity low, so condensation does not occur.
Fix leaks promptly.
Do not store excess materials as they may, over time, attract moisture and contribute to mold growth.
Make sure areas like the bathroom have fans to help with ventilation.
If you have a clothes dryer, make sure it vents to the outside.
Clean drip pans from the refrigerator and air conditioner often.
Water damage is hazardous to your health and dangerous for your home or business, therefore time is of the essence when it occurs. If treated quickly, you can minimize the damage, reduce restoration costs and prevent the growth of mold, and other contaminants.
Immediate Action is important. Your home or business and its content are less likely to grow mold if they are dried within 48 hours.
• Shut off water source if possible
• Remove as much water as possible by mopping and blotting the saturated area
• Wipe furniture to remove excess water
• Place aluminum foil between legs and wet carpet
• Prop up wet furniture cushions for even drying
• Lift drapes off flooring, loop through a coat hanger and hang on curtain rod
• Remove wet area rugs
• Turn on air conditioner if damage occurs in summer
• Move valuable paintings, art objects and photos to a safe, dry place
• Remove damp books from shelves and lay them out to dry
• Open closet doors, furniture drawers and luggage to aid in drying
• Remove any wet fabrics and dry immediately
• Hang furs and leather goods to dry separately at room temperature
Do Not
• Use your household vacuum to remove the excess water
• Use electrical appliances while standing on wet flooring or carpets
• Go into any room with standing water if the electricity is on
• Lift tacked down carpet without professional help as this could cause damage and shrinkage
• Go into any room where the ceiling is sagging
• Wait to call for professional help. The longer you wait the more damage will occur.
What can you do?
What do you do if you suspect that you have a mold problem? Here are some important things for you to know and steps you can take to find out more.
Mold growth requires a wet environment, and it usually grows in the home as a consequence of improperly controlled water damage.
Many molds may require a high level of moisture during initial growth, but when mature, survive and reproduce indefinitely at much lower moisture levels, sometimes as low as standard indoor humidity levels.
Mold growth can be effectively prevented only by quick and efficient drying, which removes the moisture necessary for initial mold growth before it can get a foothold.
If you suspect mold, contact an experienced contractor certified in mold remediation.
The best way to thwart mold is through prevention. Here are some tips to consider:
Locate and correct the source of the moisture.
Inspect your roof annually for leaks. Replace missing shingles or tiles. Check flashing installed between surfaces, including chimneys, vent stacks or dormers; they are often the most common sites for leaks.
In colder climates, make sure you have plenty of attic insulation and ventilation. This can prevent the formation of ice dams which can cause water to back up under roof shingles.
In any climate, attic ventilation is a must. This allows for warmer air to escape and better circulation.
Inspect plumbed rooms, such as the kitchen, laundry room, and bath for leaks or signs of leakage in water supply and waste lines.
Make sure that shower walls and floor are structurally sound, and grout and joints are well sealed and in good condition.
Inspect commode water supply lines for leakage. Check to make sure the fixture is properly secured to the floor and does not shift or rock when weight is applied.
Inspect central air-conditioning systems annually for proper operation and drainage, and to ensure there is no microbial growth in the air-handler, pan, or duct work.
Inspect crawl spaces to ensure adequate insulation, ventilation, and drainage.
You want your home back to the condition it was in prior to the mold damage. At Recovery Loss Consultants of Broward County, FL, we know just how to do that.
How can you help?
You’ve discovered mold in your home, and you’re on the right track to finding out what your next step should be. Here are some things you should know to face your mold claim with confidence.
Moisture control is the key to mold control.
Locate the source of moisture. It may be due to improper or inadequate ventilation.
If the source is running water, turn off the water to the structure.
Keep gutters clear so water doesn’t collect.
Make sure the ground slopes away from the structure so water won’t pool or seep into the foundation.
Keep indoor humidity low, so condensation does not occur.
Fix leaks promptly.
Do not store excess materials as they may, over time, attract moisture and contribute to mold growth.
Make sure areas like the bathroom have fans to help with ventilation.
If you have a clothes dryer, make sure it vents to the outside.
Clean drip pans from the refrigerator and air conditioner often.
Water damage is hazardous to your health and dangerous for your home or business, therefore time is of the essence when it occurs. If treated quickly, you can minimize the damage, reduce restoration costs and prevent the growth of mold, and other contaminants.
Immediate Action is important. Your home or business and its content are less likely to grow mold if they are dried within 48 hours.
• Shut off water source if possible
• Remove as much water as possible by mopping and blotting the saturated area
• Wipe furniture to remove excess water
• Place aluminum foil between legs and wet carpet
• Prop up wet furniture cushions for even drying
• Lift drapes off flooring, loop through a coat hanger and hang on curtain rod
• Remove wet area rugs
• Turn on air conditioner if damage occurs in summer
• Move valuable paintings, art objects and photos to a safe, dry place
• Remove damp books from shelves and lay them out to dry
• Open closet doors, furniture drawers and luggage to aid in drying
• Remove any wet fabrics and dry immediately
• Hang furs and leather goods to dry separately at room temperature
Do Not
• Use your household vacuum to remove the excess water
• Use electrical appliances while standing on wet flooring or carpets
• Go into any room with standing water if the electricity is on
• Lift tacked down carpet without professional help as this could cause damage and shrinkage
• Go into any room where the ceiling is sagging
• Wait to call for professional help. The longer you wait the more damage will occur.
Saturday, March 6, 2010
You’ve suffered a water loss, and you’ve done the right thing by trying to find out more information on how to deal with it. Here are some important things for you to know, so you can face your water loss more confidently:
Water Source: If possible, stop the source of the water. Turn off your outside water main, or call a plumber or other qualified tradesman to stop the source of water flow. Contact your local utilities department if you can’t find how to turn off the water main.
Electrical: Disconnect all power to affected areas. Do not operate your TVs or other electrical appliances while standing on wet carpets or floors (especially if concrete). Do not use your household vacuum cleaner to remove water.
Air Conditioning: Turn on your air conditioner (no lower than 72 degrees) to speed drying in the summer, or more humid regions.
Ceilings: Punch small holes in sagging ceilings to relieve trapped water. Place a plastic (not metal) bucket under the leak. Do not turn on ceiling light fixtures or fan if the ceiling is wet.
Floors: Remove as much standing water as possible by squeegee, mopping or blotting.
Carpeting: Blot wet carpet with clean white towels. Remove Oriental rugs or other colored rugs from wet wall-to-wall carpet. Place a fan so air flows over the carpet, speeding the drying process.
Clothing/Fabrics: Move wet items to a dry place. Do not allow draperies to remain in contact with wet floors or carpeting. Open and empty drawers and cabinets for complete drying. Hang furs and leather goods to dry separately at room temperature.
Furniture: Move lighter pieces off of the carpeting. Place plastic wrap or plastic bags beneath the legs of larger furniture. Wipe any residual water off of the furniture.
Art Objects/Paintings: Remove valuable painting and pictures from wet walls. Transfer all objects to a dry, safe place.
Upholstery: Remove and prop up wet upholstered cushions for even drying. Check for possible bleeding of colors.
Luggage: Open suitcases and luggage to dry in sunlight if possible.
Books/Magazines: Do not leave books, magazines, or other colored items on wet carpets or floors. High value books should be given to a professional for proper drying and restoration as soon as possible.
Water Source: If possible, stop the source of the water. Turn off your outside water main, or call a plumber or other qualified tradesman to stop the source of water flow. Contact your local utilities department if you can’t find how to turn off the water main.
Electrical: Disconnect all power to affected areas. Do not operate your TVs or other electrical appliances while standing on wet carpets or floors (especially if concrete). Do not use your household vacuum cleaner to remove water.
Air Conditioning: Turn on your air conditioner (no lower than 72 degrees) to speed drying in the summer, or more humid regions.
Ceilings: Punch small holes in sagging ceilings to relieve trapped water. Place a plastic (not metal) bucket under the leak. Do not turn on ceiling light fixtures or fan if the ceiling is wet.
Floors: Remove as much standing water as possible by squeegee, mopping or blotting.
Carpeting: Blot wet carpet with clean white towels. Remove Oriental rugs or other colored rugs from wet wall-to-wall carpet. Place a fan so air flows over the carpet, speeding the drying process.
Clothing/Fabrics: Move wet items to a dry place. Do not allow draperies to remain in contact with wet floors or carpeting. Open and empty drawers and cabinets for complete drying. Hang furs and leather goods to dry separately at room temperature.
Furniture: Move lighter pieces off of the carpeting. Place plastic wrap or plastic bags beneath the legs of larger furniture. Wipe any residual water off of the furniture.
Art Objects/Paintings: Remove valuable painting and pictures from wet walls. Transfer all objects to a dry, safe place.
Upholstery: Remove and prop up wet upholstered cushions for even drying. Check for possible bleeding of colors.
Luggage: Open suitcases and luggage to dry in sunlight if possible.
Books/Magazines: Do not leave books, magazines, or other colored items on wet carpets or floors. High value books should be given to a professional for proper drying and restoration as soon as possible.
Subscribe to:
Posts (Atom)
